Sanyo Denki

As the market leader in cooling fans , Sanyo Denki has set new standards in technology, quality and reliability. In addition to traditional DC and AC unit fans, Sanyo Denk's product range includes:

• Temperature Controlled Models
• Splash Proof models
• Oil Proof Models
• Extra Long Life Models
• Special fans for cooling microprocessors
• Centrifugal Fans
• Centrifugal Blowers

Sanyo Deck unit fans are designed to operate over a wide temperature range of -40 ° C… + 85 ° C. Fans are an excellent choice, especially for cooling freezers, cold rooms, heat-generating lighting devices (projectors, LED lights), telecommunications equipment, electric car quick chargers, PV inverters and equipment for wind turbines in cold areas.

Sanyo Denki - San Ace T9GT

• Operating voltages: 12VDC or 24VDC
• Rated power 0.84 - 26.4W.
• Max. static pressure 105 to 315Pa
• Max. air flow 0.52 - 6.00 m3 / min
• Six different models. 40x25 mm -120x38 mm.
• Aluminum frame and plastic fan blades
• (Flammability: UL94V-1)
• Operating temperature -40 ° C to +85 ° C
• PWM control
• The product is available with or without a pulse sensor

Sanyo Denki - San Ace 120L 9LG

• Service life 180,000 hours, operating temperature -20 ° C ... + 70 ° C
• Estimated service life of 9LG Long Life unit fans
• is up to 180,000 hours.
• Operating voltages: 12VDC, 24VDC or 48VDC
• Rated power 17 - 39W.
• Max. static pressure 190 - 370Pa
• Max. air flow 5.00 - 7.00 m3 / min
• Size 120x120x38mm
• Aluminum frame and plastic fan blades
• (Flammability: UL94V-1)
• Operating temperature -20 ° C to +70 ° C
• PWM control, available with or without pulse sensor.

Sanyo Denki - Sanmotion - Servomotors

Servomotors AC, Power 0.030-20kW, flange size 40-220mm, available IP67

Servomotors DC, Flange sizes 28-86mm

Combines the best features of a stepper motor and a servomotor.

Quick positioning The design is based on a 50-pole stepper motor with a positioning time is substantially shorter than with a servomotor. Maximum torque at low speed.

Small construction size!

The stepper motor gives full torque in the 0-speed range.

Enables high torque and fast acceleration at low power.

When the power requirement of the AC servomotor is 300 W.

Provides the same performance values ​​as a 42 W PB servomotor. So PB saves space and money!

High resolution, accurate positioning! Pulse sensor, selectable from 200 to 12,800 pulses / revolution.

Low warming, good efficiency!

Compared to a normal stepper motor, the current of the Sanyo Denki - SANMOTION PB motor is determined by the torque. Therefore, the warming is less, the service life of the motor bearings is extended and the energy loss is lower.

Sanyo Denki - Sanmotion - Stepper motors

The Sanyo Denki range includes a wide range of stepper motors and their controllers.

Sanyo Denki - UPS units

Sanyo Denki's range also includes energy-efficient UPS units in power classes 1 to 5 kVA.