You are here

Servomotors DC, Sanyo Denki

Flange sizes 28-86mm

The Sanyo Denk PB Series Servomotor combines the best features of a stepper motor and a servomotor.

Shorter Position Settling Time

  • The design of the PB series motor is based on a 50-pole stepper motor with a substantially shorter positioning time than the servomotor. The PB servomotor delivers maximum torque at low speeds.

High resolution, accurate positioning!

  • Pulse sensor pulse numbers selectable from 200 pulses / revolution up to 12,800 pulses.

Small construction size!

  • The stepper motor gives full torque in the 0-speed range. This allows for high torque and fast acceleration at low speeds using only a 42 W PB servomotor. Using an AC servomotor would require 300 W. The PB not only saves space, but also money!

Low warming, good efficiency!

  • Unlike a normal stepper motor, which draws a constant current all the time, the current of a SANMOTION PB series motor depends on the torque to be loaded. Therefore, the warming is less, the service life of the motor bearings is extended and the energy loss is lower.

PB series motor sizes

  • 28 mm
  • 42 mm
  • 60 mm
  • 86 mm

R2 servomotor 200V AC

  • Medium moment of inertia
  • Good efficiency
  • A small ripple
  • Flange sizes 40 mm, 60 mm and 80 mm
  • Power 30 W - 750 W
  • Maximum speed 6000 rpm
  • Sensor 17-bit (131070 PPR) absolute or incremental
  • Optional holding brake
  • IP67

Q1 servomotor 200V AC

  • Low moment of inertia
  • Great dynamics
  • Flange sizes 40 - 180 mm
  • Power 30 W - 7.5 kW
  • Maximum speed 5000 rpm
  • Sensor increment (max. 10000 PPR) or absolute (max. 21 bit)
  • Optional holding brake
  • IP40 / IP67

Q2 servomotor 200V AC

  • Medium moment of inertia
  • Good efficiency
  • A small ripple
  • Flange sizes 42 - 220 mm
  • Power 60 W - 15 kW
  • Maximum speed 5000 rpm
  • Sensor increment (max. 10000 PPR) or absolute (21 bit)
  • Optional holding brake
  • IP40 / IP67

Q4 servomotor 200V AC

  • Low moment of inertia
  • Great dynamics
  • Flange sizes 180 - 220 mm
  • Power 11k W - 20 kW
  • Maximum speed 2000 rpm
  • Incremental encoder (max. 10000 PPR) or absolute (max. 21 bit)
  • Optional holding brake
  • IP67

P5 servomotor 200V AC

  • Very low power requirement
  • High accuracy
  • Flange sizes 20 mm and 28 mm
  • Power 10 W - 40 W
  • Maximum speed 5000 rpm
  • Incremental sensor 2000 P / R & 2048 P / R
  • Optional holding brake 24 VDC

Sales information

Wermundsen OÜ
Mustamäe tee 55
EE-10620 Tallinn, Estonia
Tel: (+372) 601 4202
wermundsen@wermundsen.ee

Product images

Manufacturer's homepage


Additional information

PDF icon dc_servo.pdf

Servomotor amplifiers

200V RS1
Servo Drive
• 10 W – 15 kW
• Pulse train
• Analog +/- 10V
• GA1060 Serial
200V RS1
CANopen Servo Drive
• 10W – 15 kW
• CANopen
200V QS1
Type C Servo Drive
• 30W – 15 kW
• Position Function
• (8 bit)
200V RR1A
Multi-Axis Drive
• 1600W maks
• Pulse train
• GA1060 Serial
24VDC QS1J
Servo Drive
• 50 & 80 W
• Pulse train
• Analog +/- 10V
Contact us