EXNT TRAFAG pressure transmitter
Output 4 ... 20mA, accuracy 0.1% or 0.3%, operating temperature -40 ... + 120 ° C
Suitable for explosive conditions, such as gas and oil industries and mines.
Ex-pressure transmitter EXNT, type 8292 was designed to meet the requirements of ATEX and IECEx Ex-classes 0, 1, 2, gases, dust 20, 21, 22 and mines.
(II 1G, e.g. IIC T4 / T6 Ga, II 1 D, e.g. III C IP6x T130 ° Da, I M1, e.g. I Ma, II 1 / 2G, e.g. IIC T4 / T6 Ga / Gb). The pressure transmitter can also comply with EMC IEC61000 standards.
The technical advantages of EXNT are 0-400 mbar up to 0 ... 2000 bar, especially good overpressure resistance (up to 3xFS) and long-term stability due to the so-called "Thin film on steel" sensor. The sensor is welded together and completely gas-tight. Output 4 ... 20 mA, accuracy 0.1% or 0.3%. Various pressure and electrical connections available, up to protection class IP67.
Permissible operating temperature -40 ° C ..120 ° C.
Wermundsen OÜ
Mustamäe tee 55
EE-10620 Tallinn, Estonia
Tel: (+372) 601 4202
wermundsen@wermundsen.ee
h72329g_en_8292_exnt_ex_pressure_transmitter.pdf | EXNT0.4A | 0… 0,4 |
1,2 |
10...30VDC | +- 0,5% |
| EXNT0.6A | 0… 0,6 |
1,5 |
10...30VDC | +- 0,5% |
| EXNT1.0A |
0… 1 |
2 | 10...30VDC | +- 0,5% |
| EXNT2.5A |
0… 2,5 |
5 | 10...30VDC | +- 0,5% |
| EXNT4.0A |
0… 4 |
8 | 10...30VDC | +- 0,5% |
| EXNT6.0A |
0… 6 |
12 | 10...30VDC | +- 0,5% |
| EXNT10.0A |
0… 10 |
20 | 10...30VDC | +- 0,5% |
| EXNT16.0A |
0… 16 |
32 | 10...30VDC | +- 0,5% |
| EXNT25.0A |
0… 25 |
50 | 10...30VDC | +- 0,5% |
| EXNT40.0A |
0… 40 |
80 | 10...30VDC | +- 0,5% |
| EXNT100.0A |
0… 100 |
200 | 10...30VDC | +- 0,5% |
| EXNT250.0A |
0… 250 |
500 | 10...30VDC | +- 0,5% |
Tel: (+372) 601 4202
wermundsen@wermundsen.ee
Mustamäe tee 55
EE-10620 Tallinn, Estonia
