Solenoid valves 203 ASCO

Features:

• Solenoid valves comply with all relevant EC directives
• The valves are specially designed to keep pressure fluctuations to a minimum, prevent water shocks and ensure silent closing.

MATERIALS IN CONTACT WITH THE FLUID
(*) Make sure that the materials are suitable for the fluid

• Housing Brass
• Anchor Tube Stainless Steel
• Anchor Stainless Steel
• Springs Stainless Steel
• Guide Ring PTFE (Teflon)
• Seals NBR
• Valve Plate NBR

ELECTRICAL PROPERTIES: 

• Coil insulation
• class F
• Connector Plug PG11
• Electrical safety VDE 0580
• Protection class IP65
• Constant voltages DC (=): 24 V
• Operating current 100 - 500 mA

Options available:

• Valves available with NBR (Nitrile-buna-n), EPDM (ethylene-propylene), CR (chloroprene / neoprene) and PTFE (Teflon) and with seals and diaphragms.
• explosion-Proof
• Relative electronic control unit (E908A001)
• Control unit features:
• control signals: analog 0 - 10 VDC, 0 - 20 mA or 4 - 20 mA
• adjustable coil current (= flow rate) with required control signals
• adjustable ramp
• adjustable frequency
• the output current is independent of the coil resistance and the supply voltage variation
• With IP65 protection class
• Control voltage 0 - 24 VDC
• 24 VDC pulse width modulated (300 Hz)

Flow control characteristics ( ³ ) Hysteresis <7.5%, frequency <3%, sensitivity <2%