You are here

Microflowmeter for low viscosity materials LFM KEM

Microflowmeter for low viscosity materials LFM KEM

The microflow meter is suitable for liquids with the lowest viscosity in all types of dosing and filling applications. Its measuring element is based on the principle of a double ring piston. Thanks to the low pendulum mass and minimal friction losses, the LFM responds to the lowest volume flows. Only high-quality stainless steel, which can withstand even corrosive fluids, is used in the production of the microflowmeter. The highly accurate measuring element and the very strict production tolerances of the individual components minimize leaks and thus guarantee good linearity and repeatability of the LFM.

Features of the LFM microflowmeter:

• Measuring range 0.005 ... 0.25 l / min
• Viscosity 0.6 ... 6 mm2 / s
• Linearity ± 2.5% of measured reading
• Materials: Body AISI 316L, Pendulum DIN 1.4122 Ring piston: DIN 1.4122 Seals: PTFE, FKM and FFKM
• Maximum pressure 100 bar
• Fluid temperature -20 ° C ... + 120 ° C

Signal converters suitable for LFM flowmeter:

• Pulse at output (VTE 02)
• Pulse at output (VTE 04)
• 4-20mA and pulse output that can be linearized (10-point linearization) (WT.02-WI.02)
• Explosive atmosphere signal converter (VTE Ex)

The local monitors and Electronics:

• the local display in an analogous well as the frequency output (VTC / VIC)
• wall-mounted display analog and frequency output (VTG / VIG)
• panel mounted display analog and frequency outputs (FAS 100)
• wall-mounted local display in an analogous well as the frequency output (FAW100)
• Frequency / analog converter (FAU 50)
• Intrinsically safe for explosive atmospheres (EWS)

Sales information

Wermundsen OÜ
Mustamäe tee 55
EE-10620 Tallinn, Estonia
Tel: (+372) 601 4202

Product images

Manufacturer's homepage

Additional information

PDF icon en_datasheet_lfm-10.pdf
Contact us